Place of Origin:
Chengdu
Brand Name:
Libre
Certification:
ISO9001
Model Number:
Razor Slitter for Corrugator Machine
Contact Us
Corrugated Cardboard Slitting Blade Carbide Circular Knife for Packing Industry
Corrugated Cardboard Slitting Blade also called Corrugated Slitter Machine Blades, they are used in packing industry for carton production lines. The quality of Corrugated Cardboard Slitting Knife directly influences the the the knife’s working life and cutting effect, in other words, the cutting length and cardboard performance. Steel and Carbide material are carefully selected to meet your budget and cutting requirements. Please contact us to get a solution.
Common Sizes of Razor Slitter Blade for Corrugated Industry:
Machines | OD(mm) | ID(mm) | Thickness (mm) |
Position Holes | Hole Size(mm) |
Agnati | 220 | 115 | 1 | 3 | 9 |
Agnati | 240 | 115 | 1 | 3 | 9 |
Agnati | 240 | 115 | 2 | 3 | 9 |
BHS | 240 | 32 | 1.2 | 2 | 8.5 |
Fosber | 230 | 110 | 1.1 | 6 | 9 |
Fosber | 230 | 135 | 1.1 | 6 | 9 |
Fosber | 291 | 203 | 1.1 | 6 | 8.5 |
Gopfert | 340 | 230.2 | 1.0 | 8 | 8.5 |
Hsieh Hsu | 270 | 168 | 1.2 | 8 | 8.5 |
Isowa | 260 | 140 | 1.1 | 6 | 9.5 |
Marquip | 260 | 168.3 | 1.2/1.3 | 8 | 10.5 |
Mitsubishi | 280 | 202 | 1.4 | 6 | 7.6 |
Mitsubishi | 280 | 160 | 1.1 | 6 | 7.6 |
Vatan Makeina | 270 | 140 | 1.3 | 6 | 11 |
MingWei | 265 | 112 | 1.2 | 6 | 11 |
Peters | 250 | 150 | 0.8 | ||
Peters | 250 | 150 | 1.2 | ||
TCY | 300 | 112 | 1.2-1.5 | 6 | 12 |
MHE | 280 | 202 | 1.4 | 6 | 7.5 |
MHE | 280 | 160 | 1 | 6 | 7.6 |
Justu | 200 | 122 | 1.2/1.3 | ||
Kaituo | 230 | 110 | 1.3/1.4 | ||
Justo | 260 | 158 | 1.4/1.5 | 8 | 11 |
Application of cardboard cutting blades:
F. A. Q.
1. The short working life time of corrugated board knives.
Is the grain size of the grinding wheel proper?
Too coarse grain size of grinding wheel: make a short working life time of knives
2. The edges of corrugated boards cut by knives with burr and dent
Please check the cutting edge of your blade. Is the cutting edge keen enough
the corrugated board is too wet ?
3. Break of knife
1) Improper assembly will cause the quick break of blades. Any improper touch of the
blade is strictly prohibited during the working
2) Unstable swing grinding wheels break the knives, please check the bearing of
grinding wheels.
3) Improper touch or strike with other hard things
4) Accident collision of knives.
4. Chips on the cutting edge after the grinding
1) Unstable swing grinding wheels may cause this problem ,even break the knives
2) The strike of hard things may cause the chips on the cutting edge
5.The edge of corrugated board is not straight
Unmatched strength of knives for the corrugated board with high density
Send your inquiry directly to us